User`s manual

4.7.2 Setting elements
4 - 27
4.7 Setting Packets
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
■ Setting of non-verified reception
Configure the non-verified reception setting.
Screen display
Select "Non-verified Reception" on the Add New screen.
Operating procedure
• Set the items on the screen.
■ List of available devices for "Send (Receive) Data Storage Area"
The following list shows the available devices for "Send (Receive) Data Storage Area".
● QCPU (Q mode)
Item Description
Element Name Set a name of the element.
Data Length Set the number of characters not to be verified.
Category Device type
Sym
bol
Device range
Other than
those
mentioned
right
Basic model
QCPU
Universal
model QCPU
(except for
Q00UJ/Q00U/
Q01U)
Q00U/Q01U Q00UJ
Internal
user
*1,*2
Input X 0 to 1FFFH 0 to 7FFH 0 to 1FFFH 0 to 1FFFH 0 to 1FFFH
Output Y 0 to 1FFFH 0 to 7FFH 0 to 1FFFH 0 to 1FFFH 0 to 1FFFH
Internal relay M 0 to 32767 0 to 32767 0 to 61439 0 to 61439 0 to 61439
Latch relay L 0 to 32767
Link relay B 0 to 7FFF
H 0 to 7FFFH 0 to EFFFH 0 to EFFFH 0 to EFFFH
Data register D 0 to 32767 0 to 32767 0 to 4212735 0 to 94207 0 to 32767
Link register W 0 to 7FFF
H 0 to 7FFFH 0 to 4047FFH 0 to 16FFFH 0 to 7FFFH
File register File register
R
*2
0 to 32767 0 to 32767 0 to 32767 0 to 32767 −
ZR
0 to
1042431
0 to 1042431 0 to 4184063 0 to 65535 −
Buffer
memory
Intelligent
function module
device
U\G
1024 to 6911, 9728 to 16383, 20480 to 24575
*1 : Do not specify a local device.
*2 : Specify devices within the range specified in the Device setting of the PLC parameter.