User`s manual

4 - 36
4.9.2 Displaying protocol execution logs
4 PREDEFINED PROTOCOL SUPPORT FUNCTION
GX Works2
4.9.2 Displaying protocol execution logs
Display the protocol execution logs and the protocol execution results when the protocol settings are
set.
Operating procedure
1. Select a module to be debugged. ( Section 4.9.1)
2. Select [Debugging Support Function] ⇒ [Protocol Execution Log].
The Protocol Execution Log screen is displayed.
Displa
y
contents
Item Description
Object Module
Display the target module (I/O address and module type) and channel of the protocol execution
logs being displayed.
No. Display the execution logs in the order from the latest.
Start Time and Date Display the start date of the protocol execution.
End time and Date Display the end date of the protocol execution.
Model Display the external device name.
Protocol No. Display the executed protocol number.
Protocol Name Display the executed protocol name.
Type
Display the communication type of protocol: 'Send Only', 'Receive Only', or 'Send&Receive'.
When a functional protocol is executed, "Functional protocol" is displayed.
When a protocol is executed using the dedicated instruction (CPRTCL instruction) by specifying
its protocol number which is not written to the module, "Unregistered protocol No." is displayed.
Execution Result
Display the execution results of the protocols.
Error completion : Displayed with red background.
Normal completion: Displayed with light green background.
For protocols with the 'waiting for transmission', 'sending', 'waiting for reception', or 'receiving'
status, the corresponding logs are displayed in light blue.
(To the next page)