User`s manual

1 - 3
1.2 Features of Operations of Intelligent Function Module
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
■ Setting data to intelligent function modules
● Intelligent function module parameters (initial setting/auto refresh)
The intelligent function module parameters can be set by opening the data of each intelligent
function module on the Project view.
On the intelligent function module parameter list, the number of set parameters (initial setting/auto
refresh) can be checked. In addition, the enabled/disabled status of the parameters can be
switched.
The number of settable parameters (initial setting/auto refresh) may differ depending on the CPU
module to be used.
For details of the limit of the number of parameters depending on the CPU module, refer to Section
2.1.7.
● Switch setting of intelligent function module
The switch setting of the intelligent function module can easily be performed without regard to the
order of bits.
The switch setting of the intelligent function module links with the switch setting of the PLC
parameter.
● Writing/reading data to/from intelligent function module
Using the Write to PLC and Read from PLC functions, the intelligent function module parameters
can be written/read. Data can also be written/read to/from the buffer memory and flash ROM.
<Data setting screen for the intelligent function module> <Intelligent function module parameter list>
<Switch setting of the intelligent function module> <Switch setting of the PLC parameter>