User`s manual

1 - 5
1.3 Intelligent Function Module Data
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
1.3 Intelligent Function Module Data
This section explains intelligent function module data which can be used in GX Works2.
For details of each item, refer to the user’s manual of the module to be used.
Intelligent function module parameters are created when the intelligent function data are set. The intelligent
function module parameters include the data for initial setting and auto refresh.
The following table shows the intelligent function module data and the data registered to the intelligent
function module parameters as initial setting and auto refresh.
Note that the auto refresh configures the settings to automatically store the error information and status
information stored in buffer memory to the specified device in the programmable controller CPU.
● QCPU (Q mode)
Module type Module model Data Description
Intelligent function
module parameter
Initial
setting
Auto
refresh
Analog Module
Q64AD
Q68ADV
Q68ADI
Q64AD-GH
Q62AD-DGH
Q68AD-G
Q66AD-DG
Switch Setting Set the intelligent function module switches. −−
Parameter
Set the basic settings and warning output function
settings.
−
Auto Refresh Set the devices for auto refresh. −
Q62DAN
Q64DAN
Q68DAVN
Q68DAIN
Q62DA
Q64DA
Q68DAV
Q68DAI
Q62DA-FG
Q66DA-G
Switch Setting Set the intelligent function module switches. −−
Parameter
Set the basic settings and warning output function
settings.
−
Auto Refresh Set the devices for auto refresh. −
Q64AD2DA
Switch Setting Set the intelligent function module switches. −−
Parameter (A/D
conversion part)
Set the basic settings, scaling function settings, shift
function, input signal error detected function, and logging
function.
−
Parameter (D/A
conversion part)
Set the basic settings, scaling function settings, and shift
function.
−
Auto Refresh Set the devices for auto refresh. −
Q61LD
Parameter
Set the basic settings and warning output function
settings.
−
Auto Refresh Set the devices for auto refresh. −
Temperature
Input Module
Q64RD
Q64RD-G
Q64TD
Q64TDV-GH
Q68TD-G-H02
Q68TD-G-H01
Q68RD3-G
Switch Setting Set the intelligent function module switches. −−
Parameter
Set the basic settings, warning output function settings,
and scaling function settings.
−
Auto Refresh Set the devices for auto refresh. −