User`s manual

1 - 7
1.3 Intelligent Function Module Data
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
QD75 Type
Positioning
Module
QD75P1
QD75P2
QD75P4
QD75P1N
QD75P2N
QD75P4N
Parameter
Set the basic parameters 1, basic parameters 2, detailed
parameters 1, detailed parameters 2, OPR basic
parameters, and OPR detailed parameters.
−−
Positioning Data
Axis #n
Set the positioning data including the pattern, control
method, acceleration/deceleration time, and address for
each axis. (n = number of axes)
−−
Block Starting
Data Axis #n
Set the execution sequence and execution conditions for
the positioning data. (n = number of axes)
−−
Auto Refresh Set the devices for auto refresh. −
QD75D1
QD75D2
QD75D4
QD75D1N
QD75D2N
QD75D4N
Parameter
Set the basic parameters 1, basic parameters 2, detailed
parameters 1, detailed parameters 2, OPR basic
parameters, and OPR detailed parameters.
−−
Positioning Data
Axis #n
Set the positioning data including the pattern, control
method, acceleration/deceleration time, and address for
each axis. (n = number of axes)
−−
Block Starting
Data Axis
Set the execution sequence and execution conditions for
the positioning data. (n = number of axes)
−−
Auto Refresh Set the devices for auto refresh. −
QD75M1
QD75M2
QD75M4
Parameter
Set the basic parameters 1, basic parameters 2, detailed
parameters 1, detailed parameters 2, OPR basic
parameters, and OPR detailed parameters.
−−
Servo parameter
Set the servo basic parameters, servo regulation
parameters, servo extended parameters, and servo
extended parameters 2.
−−
Positioning Data
Axis #n
Set the positioning data including the pattern, control
method, acceleration/deceleration time, and address for
each axis. (n = number of axes)
−−
Block Starting
Data Axis #n
Set the execution sequence and execution conditions for
the positioning data. (n = number of axes)
−−
Auto Refresh Set the devices for auto refresh. −
QD75MH1
QD75MH2
QD75MH4
Parameter
Set the basic parameters 1, basic parameters 2, detailed
parameters 1, detailed parameters 2, OPR basic
parameters, and OPR detailed parameters.
−−
Servo Parameter
Set the basic setting parameters, gain/filter parameters,
extension setting parameters, I/O setting parameters,
extension settings, and special settings.
−−
Positioning Data
Axis #n
Set the positioning data including the pattern, control
method, acceleration/deceleration time, and address for
each axis. (n = number of axes)
−−
Block Starting
Data Axis #n
Set the execution sequence and execution conditions for
the positioning data. (n = number of axes)
−−
Auto Refresh Set the devices for auto refresh. −
QD70 Type
Positioning
Module
QD70P4
QD70P8
QD70D4
QD70D8
QD72P3C3
Switch Setting Set the intelligent function module switches. −−
Parameter Set the basic parameters and OPR parameters. −
Positioning Data
Axis #n
Set the positioning data including the operation pattern,
control method, and acceleration/deceleration time. (n =
number of axes)
−
Auto Refresh Set the devices for auto refresh. −
Module type Module model Data Description
Intelligent function
module parameter
Initial
setting
Auto
refresh