User`s manual

1 - 14
1.4.6 List of functions for QD75/LD75 positioning module
1 OVERVIEW
GX Works2
Edit for Block Starting (QD75/LD75 positioning module) Reference
Select All Select all items.
Section 3.5.6
Jump Jump to the specified positioning data number.
Initialization of Row Initialize the row at the cursor position.
Initialization of Column Initialize the column at the cursor position.
Insert Row Add a row above the cursor position.
Delete Row Delete a row at the cursor position.
Axis Copy Utilize specified axis data to another axis. Section 2.1.3
Block Start Copy Utilize specified block start data to another block start data.
Section 3.5.6
Condition Data Edit Edit the condition data.
Edit for Auto Refresh (QD75/LD75 positioning module) Reference
Auto Device Assignment
Assign sequential devices to the items selected for auto
refresh.
Section 2.1.2
View (QD75/LD75 positioning module) Reference
Automatic Adjustment for Height
Automatically adjust the height of intelligent function module
data table.
Section 2.1.2
Automatic Adjustment for Width
Automatically adjust the width of intelligent function module
data table.
Tool (QD75/LD75 positioning module) Reference
Intelligent Function Module Tool −
QD75/LD75 Positioning Module −−
Positioning Monitor Execute the positioning monitor. Section 3.5.1
Positioning Test Execute the positioning test. Section 3.5.2
Wave Trace Execute the wave trace. Section 3.5.3
Location Trace Execute the location trace. Section 3.5.4
Data Initialization Initialize the set data of specified axis. Section 2.1.4
Request of Parameter Initialization/Flash
ROM Write Request
Request a command to write buffer memory data of QD75/
LD75 positioning module to the flash ROM.
Section 3.5.5
Offline Simulation
Simulate the waveform and location of set positioning data
offline.
Section 3.5.6
Automatic Command Speed Calculation
Calculate the constant speed of traveling time between the
start position and the target position.
Automatic Sub Arc Calculation
Calculate the positioning data of circular interpolation control
to form a smooth arc (curve line) from the angle position
created by two continuous linear interpolation controls.