User`s manual

2.1.2 Setting intelligent function module data
2 - 7
2.1 Operations of Intelligent Function Module Data
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
■ Auto refresh function
Set the auto refresh function of the intelligent function module.
Screen display
Select Project view ⇒ "Intelligent Function Module" ⇒ "(module)" ⇒ "Auto Refresh".
Operating procedure
• Setting devices
For details of the setting items, refer to the manual of each intelligent function module.
• Detailed explanation of a setting item is displayed at the bottom of the screen when it is selected.
For LD75 positioning module, a detailed explanation is displayed on the Intelligent Function
Module Guidance window. ( Section 3.5.6)
• For Structured projects, device format and address format can be switched by selecting "Device
Program Display Mode".
• "Display Filter" filters the settings so that only those related to the selected item are displayed.
• For the items of which the offset values of buffer memory and the transfer word counts can be
changed, set the items such as auto refresh devices in another screen.
Example) Setting screens of AS-i master module and FL-net (OPCN-2) interface module
<AS-i master module> < FL-net (OPCN-2) interface module >