User`s manual

2.1.3 Channel copy/axis copy
2 - 9
2.1 Operations of Intelligent Function Module Data
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
■ Data setting screen of intelligent function modules
On the data setting screen of an intelligent function module, the setting status is identified by colors as
shown below.
2.1.3 Channel copy/axis copy
Utilize specified channel/axis data to another channel/axis data when setting intelligent function module
data.
The Channel copy function is not supported by the Auto refresh function.
Operating procedure
1. Select [Edit] ⇒ [Channel Copy]/[Axis Copy].
The Channel Copy screen is displayed.
The image below is a screen when the operation is performed on the data of Q68DAIN.
2. Select the copy target channel/axis and data, and click the button.
The channel/axis data are copied.
Color
Setting status
Text Background
Blue White Default values
Black White Values other than default values
White Red Items whose values outside the setting range
Red White Items for which device is duplicated in auto refresh setting.
Black Gray Items for which setting is not required.
Black Yellow
Items for which setting (partner axis) is not required at the data number specified for axis
to be interpolated.
(QD75/LD75 positioning module only)
Green White Comments (Positioning module only)
Blue Gray Item with the transfer direction of [Intelligent Function Module → PLC]
Green Gray Item with the transfer direction of [PLC → Intelligent Function Module]