User`s manual

2.1.6 Displaying properties of intelligent function modules
2 - 11
2.1 Operations of Intelligent Function Module Data
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
2.1.6 Displaying properties of intelligent function modules
Check the setting information of an intelligent function module. This operation can also change the
installation slot number, start XY address, module name, and title.
Screen display
Select [Project] ⇒ [Intelligent Function Module] ⇒ [Property].
Operating procedure
1. Set the items on the screen.
2. Click the button.
Screen button
For the buttons on the screen, refer to Section 2.1.1.
Item Description
Module Selection −
Module Type Display the type of the intelligent function module.
Module Name Display the model of the intelligent function module.
Mount Position −
Base No.
*1
Display the base number where the intelligent function module is mounted.
Mounted Slot No. Display the current slot number.
Specify Start XY Address Display the current start XY address.
Occupied I/O points
information
For QCPU (Q mode), display the number of occupied slots and the number of
occupied I/O points of the module selected for "Module Name".
For LCPU, display the number of logically-occupied modules and the number of
occupied I/O points of the module selected for "Module Name".
Title Setting −
Title
Display the current title.
(The number of applicable characters is 32)
*1 : QCPU (Q mode) only
Occupied I/O
points information