User`s manual

2 - 18
2.1.8 Checking device duplication of auto refresh setting
2 COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
GX Works2
2.1.8 Checking device duplication of auto refresh setting
Check the device duplication of auto refresh settings among intelligent function modules.
Screen display
Select [Tool] ⇒ [Check Intelligent Function Module Parameter] ⇒ [Check Auto Refresh Duplication].
Operating procedure
1. Select the modules to check the device duplication of auto refresh settings.
2. Click the button.
If device duplication is found, the check result is displayed in the Output window.
By double-clicking the result, the corresponding error location in the program is displayed.
● When the device duplication of auto refresh settings can not be checked
In case of the following conditions, the module is recognized as a module that cannot check the device duplication
of auto refresh settings, and "Cannot Select" is displayed.
• No device is set on the Auto Refresh
screen.
• Not checked in the intelligent function module parameter list.
• The module start XY address is not set.
• Reserved module
• The access authority for security is in the read-protected mode.