User`s manual

2.1.9 Changing intelligent function module type
2 - 19
2.1 Operations of Intelligent Function Module Data
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
2.1.9 Changing intelligent function module type
The following explains the operating procedure to change intelligent function module type, for instance,
from QD75P4 to QD75D4, or from LD75D4 to LD75P4.
The intelligent function module type can be changed by copying and pasting the original data onto the
parameter setting screen of the new module data.
The following operating procedure is the instance when changing the type from QD75P4 to QD75D4.
Operating procedure
1. Add new intelligent function
module data.
( Section 2.1.1)
2. Display both parameter setting screens of the original module and the new module.
3. On the parameter setting screen of the original module, right-click the top left cell
and select [Copy] from the shortcut menu to copy all data.
Add a new module.