User`s manual

2.4.1 Registering and monitoring intelligent function modules
2 - 23
2.4 Monitoring Intelligent Function Modules
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
■ Customizing monitoring items
The module information registered to the Intelligent Function Module Monitor window can be
customized by cutting/copying/pasting/deleting unnecessary items.
The customized settings are saved along with the project.
Note that the operations to 'undo' the customized items cannot be performed.
Operating procedure
• Select unnecessary items on the Intelligent Function Module Monitor window, right-click
them and select [Cut]/[Copy]/[Paste]/[Delete] from the shortcut menu.
● Paste
The cut/copied items can be pasted in the same project in the same window only.
● Project created in former version
If a project to which the Intelligent Function Module Monitor is registered in GX Works2 Version 1.08J or earlier is
opened in GX Works2 Version 1.53F or later, all registered module information is discarded.
● Changing current value
The current value can be changed by directly inputting the desired value in "Current value" area during monitoring.
When the current value to be changed is displayed in character strings such as ON/OFF, available choices are
shown in a combo box. The current value cannot be changed is displayed in gray background.