User`s manual

3.1.1 Offset and gain settings
3 - 3
3.1 Analog Module
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
■ Settings on A/D converter module
The following explains the operation of offset/gain settings using Q68AD-G as an example.
Operating procedure
1. Check the offset/gain setting target channel(s) under "Channel Selection".
2. Apply an electric current or voltage to the module.
3. Click the or button.
The button sets the analog value which is input to the specified channel as an
offset value.
The button performs the gain setting to the specified channel.
When the settings are completed normally, "Changed" is displayed in the 'Offset/Gain status' fields.
When an error occurs, an error code is displayed at "Error Code".
4. Click the button.
The offset values and gain values are registered to the module.
Screen button
●
Displays the error contents and the corrective action for the displayed error code.
●
Clears the error.
Offset/Gain status