User`s manual

3 - 6
3.1.2 Q61LD two-point calibration
3 OPERATING INTELLIGENT FUNCTION MODULES
GX Works2
3. Click the button.
The Scale Initial Setting screen is displayed.
4. Set the conditions on the left side of the screen, and click the button.
The settings are written to the module.
5. Click the button.
The two-point zero calibration is performed.
6. Click the button.
The two-point span calibration is performed.
Screen button
●
Opens the screen to set the installation site gravitational acceleration.
●
Opens the screen to correct the two-point calibration value of the scale.