User`s manual

3.2.1 Offset and gain settings
3 - 9
3.2 Temperature Input Module
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
3. Check the offset/gain setting target channel(s) under "Channel Selection".
4. Set an offset value or a gain value on the thermocouple or the standard direct
current voltage generator for the channel whose offset/gain setting to be adjusted.
5. Enter values to "Offset Temperature Setting Value" or "Gain Temperature Setting
Value".
6. Click the or button.
The button sets the analog value which is input to the specified channel as an
offset value.
The button performs the gain setting to the specified channel.
When the settings are completed normally, "Changed" is displayed in the
"Offset Status" or "Gain
Status
" fields.
When an error occurs, an error code is displayed at "Error Code".
7. Click the button.
The offset values and gain values are registered to the module.