User`s manual

3 - 16
3.5.1 Positioning monitor
3 OPERATING INTELLIGENT FUNCTION MODULES
GX Works2
3.5 QD75/LD75 Positioning Module
This section explains the operations of the intelligent function module tools related to the QD75/LD75
positioning module.
3.5.1 Positioning monitor
Execute the positioning monitor of QD75/LD75 positioning module.
The positioning monitor is used for checking an operation of QD75/LD75 positioning module or
debugging.
When debugging a program such as ladder, use the Intelligent Function Module Monitor. (
Section
2.4)
For details of the monitor items, refer to the user's manual of the module to be used.
Operating procedure
1. Select [Tool] ⇒ [Intelligent Function Module Tool] ⇒ [QD75/LD75 Positioning Module]
⇒ [Positioning Monitor] ( ).
The Module Selection (Positioning Monitor) screen is displayed.
CAUTION
● The positioning test functions of OPR, JOG, inching or positioning data for QD75/LD75 positioning module must
be executed with the programmable controller set to STOP after the manual has been carefully read and the safety
has been ensured. Specially when executing the function on the network system, ensure the safety thoroughly
since the machinery whose operation cannot be checked by an operator may be activated. The operation failure
may cause the injury or machine damage.