User`s manual

3.5.2 Positioning test
3 - 21
3.5 QD75/LD75 Positioning Module
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
2. Select a module and click the button.
The Positioning Test screen is displayed.
The test function can be switched by selecting an item in "Select Function" under "Test" section.
For details of each test function, refer to the following sections.
■ Positioning start test
■ JOG, manual pulse generator, and OPR tests
■ Speed change test
■ Current value change test
Screen button
●
Starts the positioning operation.
●
Decelerates and stops the currently-running sequential positioning operation, and starts the
operation of the next positioning number by clicking the button during the positioning operation.
●
Stops the positioning control of the selected "Target Axis" by clicking the button during the
positioning operation.
●
Stops the positioning control of all the axes by clicking the button during the positioning operation.
●
Restarts the suspended positioning operation by clicking the button when the positioning operation
is in a suspended status.
●
Ends the positioning operation prior to the operation of the next positioning number.
Test function selection