User`s manual

3 - 26
3.5.2 Positioning test
3 OPERATING INTELLIGENT FUNCTION MODULES
GX Works2
■ Speed change test
Change the speed of axis which is being operated under the positioning start test, JOG test, or OPR
test.
Operating procedure
1. Select "New Speed" for "Select Function" on the Positioning Test screen.
2. Set the items on the screen.
3. Click the button.
The speed is changed.
Screen button
●
Performs the speed override during the positioning operation.
Item Description
New Speed
Set a speed.
Set '0' to stop the operation.
Override Set a value to override the speed of positioning operation.
Acceleration/Deceleration Time
Change
Check this to permit the change on acceleration/deceleration time, and specify the
acceleration time and/or deceleration time.