User`s manual

3 - 3 3 - 3
MELSEC-Q
3 SPECIFICATIONS
When the voltage of the external power supply is less than 22.85V DC, the analog output current and the
external load resistance value are as follows.
22.85V to 28.8V
22V
21V
20.4V
20
18.5
17.3
16.5
Analog output current
(mA)
External load resistance value( )
510480 550 600
External power suppl
y
REMARK
See the user's manual for the CPU module being used for the general specifications
for the D/A converter module.
3.1.2 I/O conversion characteristics
I/O conversion characteristics are used for converting the digital value written from the
PLC CPU to an analog output value (voltage or current output), and represented by
inclined straight lines when offset and gain values are included.
Offset value
The offset value becomes the analog output value (voltage or current) when the digital
input value set from the PLC CPU is 0.
Gain value
The gain value denotes the analog output value (voltage or current) when the digital
input value set from the PLC CPU is
4000 (in normal resolution mode),
12000 (when 1 to 5V, 0 to 5V, 4 to 20 mA, 0 to 20 mA or the user range setting is
selected in high resolution mode),
16000 (when -10 to 10V is selected in high resolution mode).