User manual
EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the INSTALLA-
TION menu.
3. Press the ENTER button (or } button).
4. Press the { or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, press the
RESET button on the terminal board using a suit-
able sharp object, push gently.
• The settings with 2 mark, you should press the
ENTER button after selecting.
Menu operation
Opt
IMAGE
XGA60
Opt
INSTALLATION
XGA60
Opt
INSTALLATION
AUTO POWER
ON
OFF
OFF
AUTO POWER
OFF
OFF
XGA60
IMAGE REVERSE
AUTO POWER
ON
OFF
OFF
AUTO POWER
OFF
OFF
IMAGE REVERSE
AUTO POWER
ON
OFF
OFF
AUTO POWER
OFF
30 min
IMAGE REVERSE
IMAGE CONTRAST ± 30
BRIGHTNESS ± 30
1
COLOR MATRIX
SHARPNESS ± 10
TINT ± 10
COLOR ± 10
RED ± 30
CYAN ± 30
GREEN ± 30
YELLOW ± 30
BLUE ± 30
MAGENTA
(Displays only when the source is selected to VIDEO)
(Displays only when the source is selected to VIDEO)
(AUTO : When the source is selected to COMPUTER)
± 30
CONTRAST R ± 30
CONTRAST B ± 30
BRIGHTNESS R ± 30
BRIGHTNESS B ± 30
EXPAND MODE 1 - 2
RESET ALL OK
1=Upper left, 2=Lower right
INSTALLATION
IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
AUTO POWER ON ON, OFF
AUTO POWER OFF
1 - 3
ON, OFF
FEATURES MENU POSITION
OFF, 5, 10, 15, 30, 60 min
VIDEO SIGNAL
AUDIO MODE
ANAMORPHIC
AUTO, NTSC, PAL, SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
LANGUAGE
SIGNAL MEMORY CALL AUTO, USER1, USER2
HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 39
TRACKING
USER
0 - 9999
CLAMP POSITION 0 - +63
CLAMP WIDTH 0 - +63
HORIZ. PIXELS 0 - 9999
VERT LINES 0 - 9999
PLL
AUTO, 0 - 7
SHUTTER (L)
0 - 299
SHUTTER (U)
0 - 299
SHUTTER (RS)
0 - 398
SHUTTER (LS)
0 - 398
VERT. SYNC
AUTO, ON, OFF
2
USER
USER
OFF
STANDARD
HIGH
LOW
COLOR TEMP.
USER
MEMORIZE
*
*
*
HOLD AUTO
USER1
,
USER2
DELETE
USER1
,
USER2
DEFAULT
ON
BEGIN -1 - -99
END 1 - 99
OFF
COMPUTER INPUT RGB, YC
B
C
R
/ YP
B
P
R
*
*
*
*
* : Setting range is different
according to the type of
the signal.
, English, Español, Deutsch, Français, Italiano,
3