User manual

EN – 26
Specifications
LCD projector
LVP-SA51U
AC100V ~ 240V, 50 / 60Hz
2.3 A
0.9-inch LCD panel: 3 pieces (for R, G, B)
Pixels 800 × 600 = 480,000 pixels
Total 1,440,000 pixels
Active pixel rate: 99.99 % or more (each panel)
16,770,000 colors
F 2.3~2.6 f = 36.0 mm ~ 43.2 mm
150 W UHP (2, 000 Hours)
40 inch ~ 300 inch (aspect ratio 4:3)
Resolution : 640 x 400 - 800 x 600 + Compressed 1024 x 768
Sync on Green available
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60
DVD (Component) / HDTV (1080i) / 720p / (525p)
1 W mono
3 cm x 4 cm square type (8Ω 1W)
Luminance signal: Vp-p=1.0V 75Ω (negative sync.)
Chroma signal: Vp-p=0.286V 75Ω (burst signal)
Vp-p=1.0V 75Ω (negative sync.)
350 mVrms, 10kΩ or more
RGB: Vp-p=0.7V 75Ω (negative sync.)
YCBCR: Y: Vp-p=1.0V (negative sync.) CBCR: Vp-p=0.7V
HD/CS : TTL level (positive or negative)
VD : TTL level (positive or negative)
Serial (Mini DIN 8P female connector) RS-232C standards
242 mm × 79 mm × 294 mm (9.5 inch × 3.1 inch × 11.6 inch)
(width × height × depth)
Approx. 3.4 kg (7.5 lbs)
2.9m (9.5 feet)
+41°F (+5°C) ~ +95°F (+35°C), 30~90%
Type
Model
Rated power supply
Rated input
LCD panels
Colors
Projection lens
Light source lamp
Picture size
PC compatibility
Video compatibility
Audio output
Speaker
S-video input
Video input
Audio inputs
Analog RGB input
(mini D-SUB 15P)
Control connector
Outside dimensions
Weight
Length of power cord
Temperature, humidity
(performance guarantee)
Legs and lens are not included.
Kensington Lock
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the Kensington System for instructions on how to use it to
secure the projector. Please contact to Kensington Technology Group as shown below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone : [phone] Fax : [phone]