Operation Manual

– 12 –
[CHANGE screen]
6
5
Press the button for the item to set or change. 5.
Run/Stop: Press the RUN or STOP button. ·
When the RUN button is selected, the operation starts, and when the STOP button is selected,
the operation stops.
SET TEMP.: Press •
or .
Set a temperature between 18°C and 30°C.
page 39
MODE: select ·
Auto, Cool, Dry, Fan or Heat by pressing the button.
Auto Mode can be valid in the MAINTENANCE MENU. *
page 39
This function can be applied to the indoor units, which are the cooling/heating free multi KXR, single ·
split PAC.
FAN: Select ·
(Powerful), (High), (Medium), (Low), or (AUTO), and press the button.
When using powerful mode, valid Powerful Fan on the MAINTENANCE MENU.*
When using automatic mode, valid the AUTO Fan on the MAINTENANCE MENU.*
Air direction: Select Auto, stop 1, stop 2, stop 3 or stop 4 and press the button. ·
LOCK: Press ·
or .
If
is pressed, remote controller operations are permitted, and if is pressed, they are
prohibited.
FILTER RESET: If the reset button is pressed, the fi lter sign turns off. ·
Press the SET button. Press the Yes button on the confi rmation screen. 6.
When you do not want to set or change, press the No button.
(Powerful mode)
Operates with the maximum fan speed.
It is suitable for heating or cooling the entire room thoroughly.
Note
If the BACK button is pressed, it returns to the previous screen. •
If individual lock/unlock is valid in the MAINTENANCE MENU, it is possible to set the remote controller •
operations to permit or prohibit each item such as run/stop, mode and temperature setting.
When individual lock/unlock are valid in the MAINTENANCE MENU, remote controller operations are •
prohibited if run/stop, mode and temperature setting are all
. (Some functions, such as reset of the fi lter
sign have been permitted.)