Operation Manual
– 13 –
The following method can also be used to set and ■
change operations on each group.
When making settings or changes in the GROUP ►
(LIST) screen
Press the GROUP LIST button in the GROUP (PANEL) 1.
screen.
page 11
The GROUP (LIST) screen is displayed.
[GROUP (LIST) screen]
2
3
Press the name of the group for which settings or changes are to be made. 2.
The group name is reverse highlighted, press the
or button.
Press the CHANGE button. 3.
The screen for CHANGE screen is displayed. Make the settings or changes.
page 12
Note
If the BACK button is pressed, it returns to the previous screen. •
Run is indicated when at least one unit is running. Malfunctions are indicated when at least one unit is not •
in good condition. Stop is indicated when all the units have stopped.
icon is displayed when at least one unit needs cleaning fi lter.
icon is displayed when at least one unit needs maintanance.
Operating mode, temperature setting, room temperature, fan speed and air direction show the state of the
representative unit.
The ones which are surrounded by red frames are the items which operations from the remote controller •
are prohibited in the group settings.
If the GROUP PANEL button is pressed, the GROUP (PANEL) screen is displayed.
•
page 11
When making settings or changes in the ALL GROUPS screen ►
Press the ALL GROUPS button on the MENU.1.
page 7
Press the name for the group to set or change. 2.
[ALL GROUPS screen]
2
3
The group name is reverse highlighted.
When the screen switches, the previously selected group name is selected. To change the page, press the
or button.
Press the CHANGE button.3.
The screen for CHANGE screen is displayed. Make the settings or changes.
page 12
Note
To display the units in a group, press the UNIT LIST button. •
page 21
To show all blocks, press the ALL BLOCKS button. •
page 9
The ones which are surrounded by red frames are the items which operations from the remote controller •
are prohibited in the group settings.
If the MENU button is pressed, the MENU screen is displayed. •
page 7