Operation Manual

– 15 –
Press the SET button. Press the Yes button on the confi rmation screen. 6.
When you do not want to set, press the No button.
Note
If the BACK button is pressed, it returns to the previous screen. •
If individual lock/unlock is valid in the MAINTENANCE MENU, it is possible to set the remote controller •
operations to permit or prohibit each item such as run/stop, mode and temperature setting.
When individual lock/unlock are valid in the MAINTENANCE MENU, remote controller operations are •
prohibited if run/stop, mode and temperature setting are all
. (Some functions, such as reset of the fi lter
sign have been permitted.)
Group Batch Operation
This section shows how to set or change the detailed setting of Batch Operation.
Set the groups for batch operation in advance.
page 231, 2456
Press the CHANGE ALL button on the MENU screen.1.
page 7
The CHANGE ALL screen is displayed.
2
3
[Individual lock/unlock settings valid in
MAINTENANCE MENU]
This function can be applied to the indoor units,
which are the model KXE4 or later, and to the
remote controller, which is the model RC-E1
or later.
Note
When the screen changes, no items are selected (the temperature setting is blank). Set only the items that
are to be set or changed.
Press the button for item to set or change. 2.
Run/Stop: Press the RUN or STOP button. ·
When the RUN button, running starts, and when the STOP button, running stops.
Temperature setting: Press •
or .
Set a temperature between 18°C and 30°C.
page 39
Mode: Select ·
Auto, Cool, Dry, Fan or Heat by pressing the button.
When using Auto Mode, valid AUTO on the MAINTENANCE MENU. *
page 36
The Auto Mode can be valid for the cooling/heating free multi KXR, GHP-R series or later and single split
PAC.
LOCK: Press ·
or .
If
is pressed, remote controller operations are permitted, and if is pressed, they are
prohibited.
Fan speed: Select ·
(Powerful), (High), (Medium), (Low), or (AUTO), and press the button.
When using powerful mode, valid the Powerful Fan on the MAINTENANCE MENU.*
When using automatic mode, valid the AUTO Fan on the MAINTENANCE MENU.*
Air direction: select Auto, stop 1, stop 2, stop 3 or stop 4 and press the button. ·
FILTER RESET: If the reset button is pressed, the fi lter sign turns off. ·
Press the SET button. Press the Yes button on the confi rmation screen. 3.
When you do not want to set, press the No button.
Note
If the BACK button is pressed, it returns to the previous screen.•
If individual lock/unlock is valid in the MAINTENANCE MENU, it is possible to set the remote controller •
operations to permit or prohibit each item such as run/stop, mode and temperature setting.
When individual lock/unlock are valid in the MAINTENANCE MENU, remote controller operations are •
prohibited if run/stop, mode and temperature setting are all
. (Some functions such as reset of the fi lter
sign have been permitted.)