Operation Manual

– 16 –
Schedule Settings
Operating schedules can be set in group units. Sixteen schedules per day can be registered for operating time (in
minutes), run/stop, mode, prohibiting remote controller operations and temperature setting.
Set the detailed daily schedule (weekday, holiday, special 1, special 2) in advance.
page 17
Press the SCHEDULE SETTING button on the MENU screen. 1.
page 7
The SCHEDULE SETTING screen is displayed.
2
Setting the current day’s schedule ■
The operating schedule for the current day is set on each group.
Press the TODAY’S SCHEDULE button on the SCHEDULE SETTING screen. 2.
3
5
4
6
Press the group name.3.
Select the group on the Select Group screen.
page 19
<When setting a schedule for the current day>
Press the item to be changed on the list.4.
When “Time”, “Lock” or “SET TEMP.” cell are pressed, a detailed setting screen for each item is indicated.
page 19, 20
Change the “RUN/STOP” or “MODE” settings by pressing the appropriate item.
To change the page, press the
or button.
<When rewriting the schedule displayed for the current day to detailed daily schedule>
Select the detailed daily schedule such as WEEKDAY (green), HOLIDAY (red), SPECIAL1 (blue) or 5.
SPECIAL2 (yellow) button and press it.
Note
Set the operating schedule for the detailed daily schedule in advance. page 17
Press the SET button. Press the Yes button on the confi rmation screen. 6.
When the CLEAR button is pressed, the selections are cleared.
Note
Press the COPY button when copying the schedule between groups. • page 20