Operation Manual

– 28 –
DISPLAY SETTING
The brightness and backlight timeout settings can be confi gured, and the mode can be switched to screen
cleaning.
When changing the settings, take the following steps.
Press the DISPLAY SETTING button on the MENU screen.1.
page 7
[DISPLAY SETTING screen]
Cleaning Mode
The mode is switched to
screen cleaning.
3
2
Select the Brightness using the 2. buttons. (Factory default : 7)
Brightness for the monitor backlight can be selected.
Select the Backlight Timeout time using the 3.
buttons. (Factory default : 10)
Time from the last operation on the touch panel until the monitor backlight turns off can be selected.
Press the SET button.4.
Pressing the SET button applies the setting.