Operation Manual

– 30 –
Press the OK button.4.
A confi rmation screen (Calculating data fi le export confi rmation screen) is displayed. Press the “OK” button on
the screen.
Note
If the CANCEL button is pressed, it returns to the previous screen.•
The “IMPORT CONFIGURATION FILES from USB” button is not needed.•
See the bundled CD-ROM for calculating on a PC.•
Important!!
Calculating Data
Follow the above procedure to transfer the calculating data to USB memory. (1)
Remove the USB memory from the central control and connect it to a PC.(2)
Insert the CD-ROM that was bundled with this unit into the PC and start the software. (3)
Operate the software according to the CD-ROM menu. (4)
There is no need to have the USB memory connected to this unit at all times. *
After installing the calculating data software, steps (3) and (4) are unnecessary. Operate the software *
with reference to the manual on the CD-ROM.
Operation Time History
The OPERATION TIME HISTORY screen displays a graph showing the accumulated daily operation time for 31
days by the group.
Press the OPERATION TIME HISTORY button on the MENU screen.1.
2
3
4
Selecting and viewing a group2.
Select a group for which you want to view the accumulated operation time.
Press a group to select. The selected group is displayed.
Selecting a date3.
Select a date for which you want to view the accumulated time.
Select a date using
button.
Press the EXPORT CSV FILE button4.
Save a CSV format data fi le of the accumulated operation time to the USB memory device.