Operation Manual

– 31 –
LAN Settings
You can set the IP address, subnet mask and gateway address of the central control.
Press the LAN SETTING button on the OPERATOR MENU screen.1.
2
3
4
5
Setting and viewing the IP Address (Factory default: 192.168.0.120)2.
Specify the IP address of the central control.
Press an IP address to set. The IP address is displayed.
Setting and viewing the Subnet Mask (Factory default: 255.255.255.0)3.
Specify the subnet mask of the central control.
Press a subnet mask to set. The subnet mask is displayed.
Setting and viewing the Default Gateway Address (Factory default: Blank)4.
Specify the Default Gateway address of the central control.
Press a Default Gateway address to set. The Default Gateway address is displayed.
Press the SET button.5.
Press the Cancel button to cancel the change.
Pressing the OPERATOR MENU button returns to the OPERATOR MENU.•