Operation Manual

– 38 –
UNIT DEFINITION Settings (SC-SL4-BE only)
Unit Defi nition1
Press the UNIT DEFINITION button on the MAINTENANCE MENU screen.1.
page 8
The UNIT DEFINITION screen is displayed.
3
2
Press the item to be set or changed on the list.2.
Each time the “TYPE” item is pressed, the unit type changes.
MULTI1 : calculating according to the amount of refrigerant fl ow. Used for KX Series.
MULTI2 : thermo ON/OFF calculation. Used for KX Series.
ON/OFF : calculating according to the unit operating time. Used for KX series, PAC.
SINGLE : calculating only when compressor is turned ON. Applied to single split PAC air conditioner
that perform communication via super link adapter.
If the “CAPACITY” item is pressed, it can be changed. (0 – 200 [kW])
page 27
To change the page, press the
or button.
Note
Please select same item for same system of watt-hour meter or gas meter.•
When you select MULTI1 or MULTI2, fan mode units are out of calculation. To calculate the fan mode •
units, please select ON/OFF.
Standby energy used during night etc. is not included in the calculation, and does not equal the value •
of watt-hour meter or gas meter. Please correct the calculation by spreadsheet.
Press the SET button. Press the Yes button on the confi rmation screen. 3.
When you do not want to make the setting, press the No button.