Operation Manual

– 8 –
1. Displaying the CHANGE GROUP screen
Click a group name on the ALL GROUPS screen to display the CHANGE GROUP screen.
3
2
CHANGE GROUP screen
This screen enables you to check the operating status and change settings of a selected group. The operating
status of a selected group is displayed in the GROUP STATUS fi eld on the left side of the screen. This screen
does not automatically update the operating status.
The following items can be viewed and confi gured. The displayed information other than run/stop and fi lter sign
is about the air conditioner specifi ed as representative. (For the settings of representative unit.
page 25.)
[RUN/STOP]
RUN, STOP
(“STOP” is displayed only when all air conditioner stop in the group.)
[MODE]
AUTO, COOL, DRY, FAN, HEAT
AUTO mode requires the SL4 central control setting. For details, refer to the User’s Manual of the SL4 central
control.
* The AUTO setting is not available for some air conditioner models.
[SET TEMP.]
By default, the temperature can be set in the range of 18 deg C to 30 deg C in increments of 0.5 deg C. When
an operating mode is selected, the range is extended to the upper and lower limits of the selected mode.
(In the SL4 central control, Fahrenheit and Celsius can be switched, and the upper and lower limits of the set
temperature can be extended. Refer to the User’s Manual of the SL4 central control.)