Operation Manual

– 13 –
• Today’s Schedule
The TODAY’S SCHEDULE screen enables you to confi gure the current day’s operation schedule for each group.
The settings determined by yearly schedule and detailed daily schedule are refl ected on today’s schedule.
1. Select a target group.
From the GROUP NAME pulldown menu on the upper left side of the screen, select a target group name.
2. Enter new settings.
From the pulldown menu, select an item of which setting you want to change. On this screen, you can register
up to 16 schedule settings of the following items per day.
[TIME]
Operation time setting (by the minute)
[RUN/STOP]
Blank (Not specifi ed), RUN, STOP
[LOCK]
Blank (Not specifi ed), LOCK, UNLOCK, RUN/STOP, MODE, SET TEMP., RUN/STOP, MODE,
RUN/STOP, SET TEMP., MODE, SET TEMP..
* As selectable items vary according to the current settings, refer to the User’s Manual of the SL4
central control.
[MODE]
Blank (Not specifi ed), AUTO, COOL, DRY, FAN, HEAT, SEASON page 21
* As selectable items vary according to the current settings, refer to the User’s Manual of the SL4
central control.
[SET TEMP.]
By default, the temperature can be set in the range of 18 deg C to 30 deg C in increments of 0.5
deg C. When an operating mode is selected, the range is extended to the upper and lower limits
of the selected mode.
(In the SL4 central control, Fahrenheit and Celsius can be switched, and the upper and lower limits
of the set temperature can be extended. Refer to the User’s Manual of the SL4 central control.)
Note
• Click the item to be changed on the list SELECT PATTERN, when you want to rewrite the current settings to
the detailed daily schedule such as WEEKDAY, etc.
• Click the CLEAR button to delete all settings.
• Confi gure the schedule settings so that items No.1 to No.16 will be sorted in chronological order.
• Settings without time settings are invalid even if other items are confi gured.