Operation Manual

– 25 –
• Group Defi nition
The GROUP DEFINITION screen enables you to defi ne and confi gure groups. The list of the following items are
displayed for each group.
[No.]
: Displays the group number.
[GROUP NAME]
: Displays the name of the target group. If no groups have been registered, this item is left
blank.
[REP. ]
: Displays the “∗” mark to indicate the representative unit of the target group.
Information from the representative unit is refl ected on the group operating information
except for the information on the run/stop and fi lter sign items.
[UNIT No.]
: Displays the list of air conditioner numbers belonging to the target group.
[DEMAND]
: Displays the processing level (LEVEL1, 2, or 3) when a demand signal is entered.
(For details on the demand, refer to the User’s Manual of the SL4 central control.)
[ALL COMMAND]
:
Prompts you to determine whether to apply collective settings.
page 11
VALID Applies collective settings
INVALID Does not apply collective settings
[OPERATION]
: Enables you to edit or delete group settings.
Note
• Factory default, one air conditioner is registered in one group in advance. To register a unit in another group,
delete the existing registration fi rst and then register it in another group.
• Factory Setting, the group names are shown by sequential numbers such as “001,002,003,...”.
• The unit numbers are displayed in different names depending on communication methods.
Example when setting a previous SL: 1-00 (Super link No. - Indoor address)
Example when setting a new SL: 005 (Indoor address)
GROUP DEFINITION screen