Operation Manual

– 26 –
■ [To edit group defi nition]
Select a group to edit.
On the GROUP DEFINITION screen, click the EDIT button of a group you want to edit. The following screen
appears, displaying the list of information about air conditioner registered in the target group and those not
registered in any group.
1
2
GROUP DEFINITION DETAILS screen
1. Enter new settings.
Enter or select a new setting. The following items can be confi gured.
[GROUP NAME]
: Type in a name using up to 16 characters (The name must be unique and not be overlapped
with other group names.)
[ENTRY]
: Click the radio button to register the air conditioner in the target group.
To cancel the registration, clear the checkbox.
(Up to 16 units can be registered in one group.)
[REP. ]
: Click the radio button of the air conditioner to be set as the representative unit.
Information from the representative unit is refl ected on the group operating information except
for the information on the run/stop and fi lter sign items.
[UNIT No.]
: Displays the air conditioner number.
[DEMAND]
: Displays the processing level (LEVEL1, 2, or 3) when a demand signal is entered.
(For details on the demand, refer to the User’s Manual of the SL4 central control.)
[ALL COMMAND]
:
Enables you to specify whether to apply collective settings.
page 11
VALID Applies collective settings
INVALID Does not apply collective settings
2. Apply new setting
Click the SET button on the lower right side of the screen. This applies the changed settings.