Smart Hub Networking System User Manual 1
Connection What you can do with HUB Connection with a computer This projector is equipped with a relaying HUB. You can do: – Easy Data (File) Exchange – Projection of the data in the computers connected via the HUB – Connection with an existing LAN – Print out through a Network printer Internal HUB to LAN port to LAN X1 - X4 port Example of Network System Provided LAN cable or optional streight LAN cable • When connecting computers, use the LAN X1 - X4 port of the internal HUB.
Settings For Windows Me/98/95 When building a network only with this projector and computers, make the preparations for all the computers to be connected. A. Check of “Client for Microsoft Networks” and “NetBEUI” 1. Click the Start button, point to Settings, and then click Control Panel. 2. Double-click Network to open the Network dialog box. 3. Make sure that Client for Microsoft Networks and NetBEUI are displayed in the installed network list.
Settings (Continued) C. Check of Computer name and Workgroup 1. Click Identification tab. 2. Make sure that Computer name and Workgroup are correct. 3. Click OK. • You must restart your computer before the new settings will take effect. D. Sharing computer 1. In My Computer, right-click the icon of the folder you want to share with others, and then click Sharing. 2. In the Properties dialog box, click Shared As. 3. In Share Name, type a name for the folder.
Settings (Continued) E. Adding Client for Microsoft Networks 1. Click the Start button, point to Settings, and then click Control Panel. 2. Double-click Network to open the Network dialog box. 3. Click Client, and then click Add. • A list of client software appears. 4. In the Manufacturers list, click Microsoft. 5. In the Network Clients list, select Client for Microsoft Networks, and then click OK. • The Client for Microsoft Networks is added to your computer. 6. Go to “A.
F. Adding NetBEUI 1. Click the Start button, point to Settings, and then click Control Panel. 2. Double-click Network to open the Network dialog box. 3. Click Protocol, and then click Add. • A list of client software appears. 4. In the Manufacturers list, click Microsoft. 5. In the Network Protocols list, select NetBEUI, and then click OK. • The NetBEUI is added to your computer. 6. Go to “A.
Settings (Continued) G. Using files and printers controlled by other computers 1. Double-click Network Neighborhood icon. 2. Double-click the icon for the computer that controls the folder you want to use. 3. To use a shared folder, double-click its icon. • If the computer you are looking for is not in your workgroup in step 2: 1. Double-click Entire Network icon. 2. Double-click the appropriate workgroup. 3. Double-click the icon for the computer that controls the folder you want to use.
Settings (Continued) For Windows 2000 When building a network only with this projector and computers, make the preparations for all the computers to be connected. A. Check of “File and Printer Sharing for Microsoft Networks”, “Client for Microsoft Networks” and “NetBEUI protocol” 1. Click the Start button, point to Settings, and then click Control Panel. 2. Double-click Network and Dial-up Connections to open the Network dialog box. 3.
Settings (Continued) 3. Click Network Identification tab. 4. Make sure that Full computer name and Workgroup are correct. 5. Click OK. • If they are not correct, change the computer name and Workgroup as follows: 1. Click Properties. 2. Input a new computer name or Workgroup. 3. Click OK. C. Sharing computer 1. In My Computer, right-click the icon of the folder you want to share with others, and then click Sharing. 2. In the Properties dialog box, click Sharing tab, and then click Shared this folder.
Settings (Continued) D. Adding File and Printer Sharing for Microsoft Networks 1. Click the Start button, point to Settings, and then click Control Panel. 2. Double-click Network and Dial-up Connections. 3. Right-click Local Area Connection 4. Click Properties to open the Local Area Connection properties dialog box. 5. Click Install. 6. Click Service, and then click Add. • A list of Network Service appears. 7.
Settings (Continued) E. Adding Client for Microsoft Networks 1. Click the Start button, point to Settings, and then click Control Panel. 2. Double-click Network and Dial-up Connections. 3. Right-click Local Area Connection 4. Click Properties to open the Local Area Connection properties dialog box. 5. Click Install. 6. Click Client, and then click Add. • A list of client software appears. 7. In the Network Clients list, select Client for Microsoft Networks, and then click OK.
Settings (Continued) F. Adding NetBEUI 1. Click the Start button, point to Settings, and then click Control Panel. 2. Double-click Network and Dial-up Connections. 3. Right-click Local Area Connection 4. Click Properties to open the Local Area Connection properties dialog box. 5. Click Install. 6. Click Protocol, and then click Add. • A Network protocols list appears. 5. In the Network Protocols list, select NetBEUI Protocols, and then click OK.
Settings (Continued) G. Using files and printers controlled by other computers 1. Double-click My Network Places icon. 2. Double-click Computers Near Me icon. 3. Double-click the icon for the computer that controls the folder you want to use. 4. To use a shared folder, double-click its icon. • If the computer you are looking for is not in your workgroup: 1. Double-click Entire Network icon. 2. Click entire contents. 3. Double-click Microsoft Windows Network icon. 4.
Troubleshooting PROBLEMS Can’t access other computers on the network. CAUSE POSSIBLE SOLUTIONS • The main power switch of the projector isn’t turned on. • The LAN cable isn’t connected properly. • The LAN cable is broken. • The connected computers (LAN cards) don’t support a 10BASE-T. • The external HUB connected isn’t set to support a 10 BASE-T and half-duplex. • The password wasn’t entered when the Windows started.
Glossary AppleTalk A trade mark of Apple Computer Inc., for a local area network standard that is built into Macintosh computers. HUB A central device for connecting the network cables from each computer. Data are communicated in either way of full-duplex transmission or half-duplex transmission. The internal HUB of this projector supports only halfduplex transmission. Also the internal HUB of this projector supports only 10BASE-T. IP address A 32-bit code which is used on the Internet or a LAN network.
