Installation Instructions
-
49
-
'13 • SRK-T-144
(8) Flap and louver control
Control the ap and louver by AIRFLOW
(UP/DOWN) and
(LEFT/RIGHT) button on the wireless remote control.
(a) Flap
Each time when you press the AIRFLOW
(UP/DOWN) button the mode changes as follows.
(b) Louver
Each time when you press the AIRFLOW
(LEFT/RIGHT) button the mode changes as follows.
(c) Swing
(i)
Swing ap
Flap moves in upward and downward
directions continuously.
(ii)
Swing louver
Louver moves in left and right directions continuously.
(d)
Memory flap (Flap or Louver stopped)
When you press the AIRFLOW (UP/DOWN or LEFT/RIGHT) button once while the ap or louver is operating, it stops swing-
ing at the position. Since this angle is memorized in the microcomputer, the ap or louver will automatically be set at this angle
when
the next operation is started.
(e) When not operating
The ap returns to the position of air ow directly below, when operation has stopped.
COOL , DRY, FAN
Remote control
display
HEAT
Approx. 5°
Approx. 20°
Approx. 20°
Approx. 35°
Approx. 35°
Approx. 45° Approx. 75°
(Swing)
(Flap stopped)
Approx. 45°
Approx. 60°
Approx. 60°
Angle of Flap from Horizontal
Center installation
Remote control
display
Right end installation
Left end installation
Angle of Louver
Left Approx. 50°
Left Approx. 50°
Left Approx. 20°
Left Approx. 45°
Center
Left Approx. 30°
Right Approx. 20°
Center
Right Approx. 50°
Right Approx. 20°
Left Approx. 20°
Center
Right Approx. 30° Right Approx. 45° Right Approx. 50°
(Louver stopped)
(Swing) (Spot) (Wide)
In HEAT operation In COOL, DRY, FAN operation
Approx. 20°
Approx. 75°
Approx.
5°
Approx. 60°