Operation Manual

– 10 –
Transmission procedure
When each button on the remote control is pressed – with the remote control pointing towards the unit
display section, a signal is transmitted.
When the air-conditioner receives the signal correctly, it will beep.
OPERATION MODE select button
Each time the button is pressed, the
mode changes.
Page 11,13
The above illustration shows all controls, but in
practice only the relevant parts are shown.
ON/OFF (luminous) button
Press to start operation, press again
to stop.
TEMPERATURE button
This button sets the room temperature.
AIR FLOW (UP/DOWN) button
This button changes the air ow (up/
down) direction.
This button is not used.
(Air ow direction adjustment can not be
performed.)
Page 12
TIME SET UP switch
This switch is for setting the time.
Page 11
SLEEP button
This button selects SLEEP operation.
Page 14
Display in OFF status
The current time, day of the week, and present OPERATING MODE are displayed while the air-conditioner is turned off.
CLEAN switch
This switch selects the CLEAN
operation.
Page 23
ON TIMER button
This button selects ON TIMER operation.
Page 15
TIMER button
This buttions is used for setting the
current time and timer function.
ACL switch
Switch for resetting microcomputer.
Page 8
PROGRAM button
This button sets WEEKLY TIMER.
Page 17
HI/ECO button
This button changes the HIGH POWER/
ECONOMY operation.
Page 21
SILENT button
This buttion changes the SILENT
operation.
Page 22
OFF TIMER button
This button selects OFF TIMER
operation.
Page 14
WEEKLY button
This button switches the WEEKLY
TIMER to ON/OFF.
Page 17
FAN SPEED button
Each time the button is pressed, the fan
speed changes.
Page 12
NIGHT SETBACK button
This button sets NIGHT SETBACK
operation.
Page 22
SET/Child Lock button
Use this button to set the timer and
Child Lock.
Page 9
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
Transmission section
[View with the cover opened]
Operation and display section for remote control
Reception
pip
RJJ012A001_EN.indd 10RJJ012A001_EN.indd 10 2015/02/20 10:16:242015/02/20 10:16:24