Operation Manual

5
■WirelessRemote-Controller
2.PartsNames
Temperaturesetting
The units of temperature can be changed. For
details, refer to the Installation Manual.
Notavailable
Appears when a non-supported func-
tion is selected.
Batteryreplacementindicator
Appears when the remaining battery
power is low.
Vanesetting
Step 1 Step 2 Step 3 Step 4 Step 5 Swing Auto
Fanspeedsetting
3Di-seesensor(Airdistribution)
Default Direct Indirect
When Direct or Indirect
is selected, the vane
setting is set to “Auto”.
Set Temperature buttons
Weekly timer ON/OFF button
Set Time button (Sets the time)
Air ow button (Changes up/down air ow direction)
Mode button (Changes operation mode)
Timer ON button
Timer OFF button
OFF/ON button
Fan Speed button (Changes fan speed)
SET/SEND button
CANCEL button
Up/Down buttons
Menu button
i-see button
Reset button
Remote controller display
Battery replacement indicator
Transmission area
Not available
Operationmode
Cool Dry
Fan
Auto
(single set point)
Heat
Auto*
(dual set point)
* The initial setting is necessary.
Refer to Installation manual.
BH79A345H01_en.indd 5 2018/05/25 14:59:38