Operating instructions

3. Press CTRL + ALT and keep them pressed

while pressing the

DELETE key.

The Log-In screen will appear ensuring the correct

setup. The default setup is normally the correct

one. If this default setup is incorrect, please contact

your local support engineer.

4. Press

Enter.

The system automatically starts up.

Shutting Down the DPX SYSTEM

Double click on the Program Manager icon.

Select Shut down from the file menu.

3. Click the

Shut down radio button and then the

OK button.

Click the

YES button.

5. Switch off the computer and the DPX SYS-

TEM unit, when a message to do so is dis-

played.

RIP Display

The DPX SYSTEM unit has no display, because

all settings and operations are made from the RIP

PC. The following screen shows the factory set-

tings (the default settings) of the DPX SYSTEM.

Page 4

RIP Display DPX System Operating Instructions

555 Theodore Fremd Ave., Rye, NY 10580 • 914-925-3261 • http://techsupport.mitsubishiimaging.com