Operating instructions

During normal operation 4 programmes are
needed.
Program RipManager
Manager
RipMate PlateSetter
Monitor
The above icons represent the available pro-
grammes, and each programme can display one or
more windows on the screen.
Program Manager
The Program Manager in Windows NT manages
all programmes. If one of the programmes fails to
start, start it by double clicking on the program
icon.
RipManager
This programme handles all media and cassette in-
formation, including loading and unloading the
material. The programme is only used when
changing material or editing media and cassette in-
formation is required.
RipMate
The RipMate handles communication to the front-
end, interprets PostScript and sends the plates
through the DPX SYSTEM unit.
PlateSetter Monitor
The Rip Monitor displays the state and progress of
the functions of the machine. For detailed informa-
tion, please refer to the section “Monitoring DPX
SYSTEM”.
Output Controller
Using the Output Controller the operator controls
which and when a specific plate is to be processed
or re-exposed.
The Output Controller window is part of the Rip-
Mate programme.
1. If the above window does not appear, select
Output Controller... from the Output pull-down
menu.
Page 5
DPX System - Operating Instructions Output Controller
555 Theodore Fremd Ave., Rye, NY 10580 • 914-925-3261 • http://techsupport.mitsubishiimaging.com