Operating instructions

34 Chapter 2: Operating Your TV

Your TV offers you six ways to change channels once their numbers have

been programmed into channel memory:

1) selecting channels one-by-one with the CHANNEL up ( ) and

CHANNEL down ( ) controls

2) directly accessing a channel by pressing the number keys

3) using the Recall option to return to the previous channel

4) using the SuperQuickView

™

function to scan through any of nine

special user-chosen lists.

5) using the ADJUST ( ) keys in TV GUIDE Plus+ SURF screens

6) using DTV Channel Guide (when available)

⁄Important: To change channels faster, use either of the following procedures:

• Enter three digits for every channel number, using zeros where

needed. For example, enter 004 to view channel 4 and 028 to

view channel 28, or

• Press the ENTER button after selecting the number of the

channel. For example, press 4, then press ENTER (in less than

three seconds) to view channel 4.

• For DTV channels you will need to select a major and minor

channel. For example, enter 04 (major), press CANCEL/SUB (a

dot will appear after the first numbers) then 11 (minor). It will

appear as: 04.11. If you press ENTER/EXCH after selecting only

the major channel, you will see the first available minor channel.

• If only one or two keys are used to select the ANT A or ANT B

channel number, the onscreen display will appear and remain

visible for three seconds if no more keys are entered. The TV

will then tune to the selected channel.

• If you have local cable channels that TV GUIDE Plus+ does not

list, you can still select these channels by using the number keys

and enter them into one of the the SuperQuickView lists.

Changing channels