Operating instructions

64 Chapter 2: Operating Your TV

⁄Important: It is normal for the red, blue and green lines to separate along the edges of

the screen. Not all of the lines will be perfectly straight. These situations are not noticeable on

normal television pictures.

Advanced Convergence

After completing the static convergence, if the colors are still out of alignment

or need further adjustment, you can use the Advanced Convergence proce-

dures below. This will allow you to adjust the color beams at 64 different

positions on the screen for the best possible picture. A position is where a

horizontal line and a vertical line cross.

Press ADJUST to select the point for

convergence.

Press ENTER to begin convergence.

Presss ADJUST to converge the point.

Press ENTER when convergence complete.

Press ADJUST to select the point that

will be converged.

Press ENTER to begin convergence.

Press ADJUST to converge the lines.

Press ENTER when convergence done.

Press VIDEO to switch from Red to Blue

Press MENU to go back

Press CANCEL to delete changes

Press VIDEO to switch to Blue.

Press MENU to go back.

Press CANCEL to delete changes.

MAIN

CONVERGENCE

ADVANCED

FEATURES

AUDIO

Using the ADJUST keys, move the flashing bracket to a position that needs

adjustment (lines are not white). Press ENTER/EXCH to stop the flashing

and use the ADJUST keys to move the lines into the correct positions. When

complete press ENTER/EXCH. The bracket will start flashing again and can

be moved to to a different position with the ADJUST keys. Pressing CANCEL

after making an adjustment will cancel all adjustments made during this

session and return to the original setting.

Adjusting the convergence (cont.)