Operating instructions

95
• You forget the code you used
to set the parental lock.
• The TV has been set to
Closed Captioning “text”
mode, but there is no text
information being broad-
cast.
• See Selecting the Input
Source for an explanation
about changing the input.
• See Using the Closed
Caption Decoder in the
Getting Started section of
Chapter 3.
Troubleshooting (cont.)
Troubleshooting
Problem
• There’s no sound even when
the volume is turned up.
Possible Solutions
• Check to see if the MUTE
button is on.
For More Information
• See Remote Control Buttons
and Functions in Chapter 1,
which explains the location
and function of the MUTE
button.
• The TV’s “Listen to:”
setting may be set to
“second audio program”
(S.A.P.).
• Check that “External Audio
System” setting is set to
“NO.”
• Use the alternate procedure
that doesn’t require the use
of the code.
• See Customizing AV
Memory in Chapter 3, which
explains how to adjust the
“Listen to:” setting.
• See Creating the AV Con-
nection in Chapter 3, which
explains how to adjust the
“External Audio System”
setting.
• See the Appendix,
Procedure for Bypassing the
Parental Lock.
• See Customizing AV
Memory in Chapter 3,
which explains how to
adjust the “Listen to:”
setting.
• If you connected your VCR
with A/V cables, use the
INPUT button to select the
input source (Input 1,2 or 3
or 4) that the VCR is
connected to.
• There is a large black or gray
rectangle on the screen.
• You cannot see a picture
when you play a tape in the
VCR.
• The sound doesn’t match the
image on screen.
• The TV’s “Listen to:”
setting may be set to
“secondary audio program”
(S.A.P.).