Specifications

Use this hook-up to:

• connect a cable box to view premium cable channels and use

TV GUIDE Plus+

equipment you will need:

OUT OUT

procedure:

† Connect the cable system’s incoming cable to the IN terminal

on the two-way splitter. NOTE: This splitter must be a type

approved by your local cable provider.

¢ Connect one coaxial cable from one of the OUT terminals on the

splitter to the ANT-B terminal on the back of the TV.

£ Connect a second coaxial cable from the other OUT terminal on

the splitter to the IN terminal on the cable box.

® Connect the third coaxial cable from the OUT terminal on the

back of the cable box to the ANT-A terminal on the back of the

TV.

emitter ends in front of the cable box. For more detail concern-

ing the placement of the transmitter lenses, see pages 16 and

17 of this book.

⁄Important: TV GUIDE Plus+ can control only those types of cable boxes and

VCRs that can select channels by using the number keypad on

their remote controls.

TV + cable with a cable box when TV GUIDE Plus

+ will be used

coaxial cable (provided with TV)

Basic Connections

IR Emitter

Transmitter Lenses

one two-way splitter four lengths of 75 ohm one IR emitter assembly