Manual

®
®
®
®
®
®
®
®
®
video input terminals
Use to connect the video output from a standard VCR or another
component to the Projection TV.
audio input terminals
Use to connect the audio from a VCR or other equipment.
video tuner output terminal
Use to connect the video to a Home Theater Receiver.
audio tuner output terminals
Use to transmit the audio to a Home Theater Receiver.
video monitor output terminal
Use to connect the video of the Projection TV to a VCR, Video Copy
Processor, etc.
audio monitor output terminals
Use to connect the audio of the Projectior_ TV to an audio amplifier.
center channel •input terminal (VS-50VA1, VS-50VA2 and
VS-60VA2 only)
Use to connect the central channel output from an amplifier that delivers
surround sound, such as an HTS-100. If you make this connection,
your television's speakers will play only the center channel signal
from your amplifier.
subwoofer out terminal
A subwoofer is a speaker designed for very low frequencies. Con-
nect the subwoofer out terminal to an amplifier and then connect
the amplifier to the subwoofer. If the subwoofer cont_fins a built-in
amplifier, then connect to the input of the subwoofer directly.
external speaker terminals
Use to connect spearate external speakers. (Only use ,;peakers with
a nominal impedance of 8 ohms.)
• Warning: Never connect equipment other than speakers to the external
speaker terminals. Don't connect speakers that are ab:eady hook-
ed up to an amplifier.
Overview of the Back Panel 27