Manual

Projection TV + home theater receiver (A/V
receiver)
equipment you will need
To hook-up a home theater receiver, you will need:
1 set of RCA pin-type audio
cables,
2 RCA pin-type video cables,
(if connecting a standard VCR),
or
u
=C3=
• 1 Super Video cable (S-VHS)
for a Super VHS home theater
receiver.
procedure
(See illustration on the following page.)
O Connect one end of an RCA pin-type video cable to the Projection TV
VIDEO INPUT terminal of the home theater receiveJ:. Connect the other
end of this cable to the VIDEO TUNER OUTPUT terminal on the back
of the Projection TV.
O Connect a Super Video cable to the S-VIDEO OUTPUT terminal of the
home theater receiver. Connect the other end of this c_,ble to the EXT-1
S-VIDEO INPUT terminal on the back of the Proj_clion TV.
Connect one end of an RCA pin-type video cable to fae VIDEO OUT-
PUT terminal of the home theater receiver. Connect the other end of this
cable to the EXT-1 VIDEO INPUT terminal on the back of the Projection
TV.
O Connect a set of RCA pin-type audio cables to the Projection TV AUDIO
INPUT terminal of the home theater receiver. Use the red cable to connect
the right (R) channel and the white cable: for connecting rite left (L) channel.
O Connect the other ends of this cable to the left and right AUDIO TUNER
OUTPUT terminals on the back of the Projection 'I_'.
40 Chapter 2: Connecting Your Projection TV