Manual

Projection TV + an amplifier that has a center charmel
out terminal (VS-50VA1, VS-50VA2 and VS.-60VA2 only)
equipment you'll need
• 1 RCA pin type audio cable
E>Important:
Using the PTV speakers as center channels speakers
If you are using a system that delivers Dolby Pro-Logic* surround sound,
such as the HTS-100, you will probably want to use the PTV speakers°
as center channel speakers. A center channel speaker adds to the realism
of surround sound systems such as Dolby Pro-Logic It does this by
allowing certain sounds, such as voice, to be directed to the center chan-
nel. In this way, the voices appear to be coming directly from the screen,
in the exact location you would hear them in a mov:.e theater.
If you make this connection, the volume for your speal:ers will be con-
trolled by the amplifier. If you are using an "invisible." system, such
as an HTS-IO0, this will not change the way you operate your TV. If
you are using another system, it may change the way you raise and
lower the volume.
Procedure:
O Connect the end of an RCA pin type cable to the CENTER IN ter-
minal on the back of the Projection TV.
O Connect the other end of this cable to the center channel OUT ter-
minal on the back of the audio amplifier.
@
7St
i'
.
_ AN7"
(VHF/UHF) I V
I
D
E
O
I ISUB
CAUTION: CONNECT "O
EXTERNAL SPEAKERS ONLY.
DO NOT MAKE ANY OTHER
CONNECTIONS iNCLUDING
EXTERNAL AMPLIFIER.
NOTE:
TURN OFF THE SET BEFORE
swrI"CI_INGSPEAKERS.
INPUT
S-VIDEOEXT-1 EX3".2
----EXT-SP(8 Q )---
® ©
*"Dolby,'" the double-D symbol [I] and "'Dolby Surround," rl"l[i_t_'=_,_H "'Dolb
Pro-Logic," are trademarks of Dolby Laboratories Licensing Corporation.
,14 Chapter 2: Connecting Your Projection TV