Manual

Adding and deleting channels
After all available channels have been programmed automatically, channels
with weaker signals can be added or delete5 by using the following
procedure.
Either "In memory" or
"Not in memory" will
appear.
First Time Set-Up
Set the clock
Memorize channels
Add/delete channels
Use Home Theater: off
Rename the inputs
Color alignment
Use ADJUST to select
Then press ENTER.
Press MENU to return to
TV Main Menu.
Add/delete channels
Antenna Ant-A
Channel 119
In memory
Use ADJUST to select
another channel,
Press CANCEL to delete.
Press MENU to return to
First Time Set-Up Menu.
0 Press the MENU button on the
remote control. The TV menu will
appear c,n the screen.
O Select "iFirst Time SeT:-Up" using
theADJUST button; then press the
ENTER button.
O Select "Add / delete charmels" us-
ing the ADJUST button; then press
the ENTER button.
O The "Add/delete channels" screen
will appear. Channels that are
in memory have the word "In
memory" under the channel
number; channels not in memory
say "Not in memory".
O
Followhlg the additional on-screen
instruztions, add a channel into
channel memory or delete a chan-
nel if, am channel memory.
_> Important:
_>Important:
The (SCAN) A button changes to a chatm_l with a higher number one
by one; the SCAN • button changes to a channel with a lower number
one by one.
You may switch between the antennas (A_t-A and Ant-B) by pressing
the input button (INPUT) or antenna button (ANT A/B).
Getting Started 59