Manual

Using home theater
Use this feature if you connected a Home Theater Receiver. It will fix
your Projection TV to external 1 (EXT-1)
• First Time Set-Up
Set the clock
Memorize channels
Acid / delete channels
Use Home Theater:. off
Rename the inputs
Color alignment
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
3"4 Main Menu.
Use home theater
This feature lets you
control all input
switching from
a Home Theater Receiver.
Press ENTER to continue.
Press MENU to return to
First Time Set-Up Menu.
O
O
Press the MENU button on the
remote control. The TV menu will
appear on the screen.
Select ' 'First Time Set-Up" using
the ADJUST butten; then press the"
ENTER button.
O Press the ADJUST button to select
"Use home theater". Then press
the', ENTER button.
O The message that confirms whether
yo a wish to use dais feature appears.
Press the ENTER button to
continue.
Use home theater
Before using this mode,
make sure you have
a Home Theater Receiver
connected.
Press ENTER to confirm
or press MENU for
First Time Set-Up.
Press MENU to return to
First Time Set-Up Menu.
O Press the ENTER button to ta:rn
home theater ON.
The screen will return to the' 'First
Time Set-Up" menu.
_> Important: When you set this feature to "on",
--the input source will be f_ed to external 1 (Ext-1).
--the input button (INPUT) will switch between aatennas A and B
(Ant-A/B), and
--all input switching is controlled by a Home Theater Receiver.
(See your Home Theater Receiver's owner's grade for more
information.)
60 Chapter 3: Operating Your Projection TV