Manual

Troubleshooting (continued)
Problems Possible Solutions
For More IJ_formation
The remote control doesn't
work.
* Check that the batteries are
installed correctly.
See"Getti_ng ready to use the
remote co:at::ol" in Chapter 1
for an explanation of how to
install batteries in the re-
mote control.
Check that the select button
is set to TV.
See "Remote control buttons
and functiol_s" in Chapt_,r I,
which explains where the
select button is located.
Be sure that you are pointing
the top of the remote control
toward the Projection TV
from a distance of no more
than 20 feet.
See "Getting ready to use the
remote con'_rol" in Chapter
1, which contains pointers
for using the remote conl;rol.
The Projection TV takes
several seconds to respond to
button commands.
• Use the ENTER key to avoid
delays.
See "Chan_,4ng channel,€_" irL
Chapter 3, which explain,,;
the function of the ENTER
key.
You can't access a channel. • Be sure that the channel you
want to view is programmed
into memory.
Check that the Projection TV
is tuned to the correct input
source (antenna) for that
channel.
See "Memorizing chanr._els"
in Chapter 3, which explains
how to program charLnels
into the Projection TV's
memory.
See "Selecting the I:nput
source" :in Chapter 3, which
explains how to change the
input so_arce.
88 Chapter 5: Troubleshooting