Specifications

VEHICLE IDENTIFICATION
TSB Revision
GENERAL
00-15
INSPECTION SERVICE POINTS FOR A BLOWN
FUSE
M1001013800108
ACX00872
AB
BATTERY
FUSE
LOAD
SWITCH
LOAD
SHORT-
CIRCUIT
OCCURRENCE
SECTION
Remove the blown fuse and measure the resistance between
the load side of the blown fuse and the ground. Close the
switches of all circuits which are connected to this fuse. If the
resistance is almost 0
Ω at this time, there is a short some-
where between these switches and the load. If the resistance is
not 0
Ω, there is no short at the present time, but a momentary
short has probably caused the fuse to blow.
The main causes of a short circuit are the following.
• Harness being clamped by the vehicle body
• Damage to the outer casing of the harness due to wear or
heat
• Water getting into the connector or circuitry
• Human error (mistakenly shorting a circuit, etc.)
VEHICLE IDENTIFICATION
VEHICLE IDENTIFICATION
M1001000401200
.
VEHICLES IDENTIFICATION NUMBER LOCATION
AC200061
The vehicle identification number (VIN) is located on a plate
attached to the left top side of the instrument panel.